Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 73% (50% is perfectly square, 100% is very short pulsewave).
Volume level for oscillator 2 is manually set to 118.
Tone for oscillator 2 is manually set to 82.
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Noise level is set to 136 and is modulated by Pressure.
Pressure mod-matrix 8 modulation amount for Noise level is -38.
High-pass filter cut-off frequency is manually set to 177.85Hz (121).
Low-pass filter cut-off frequency is set to 511.9Hz (99) and is modulated by Pressure, LFO 2.
Pressure modulates LFO 2 (amount: 3), that in turn modulates low-pass filter cut-off frequency. Pressure mod-matrix 6 modulation amount for low-pass filter cut-off frequency is -9.
LFO 2 mod-matrix 2 modulation amount for low-pass filter cut-off frequency is 3.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 255.
Filter resonance is set to 63 and is modulated by Pressure.
Pressure mod-matrix 3 modulation amount for filter resonance is 14.
Unison detune level is manually set to ±7 cents (36).
Oscillators drift level is manually set to 24. Drift rate is 15
Envelope triggering mode is set to re-trigger.
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
not yet complete
not yet complete
not yet complete
not yet complete
Controls VCF Resonance, LFO 2 Rate, VCF Cut-off Frequency, LFO 1 Rate, OSC 2 Pitch, UNKNOWN DESTINATION, Noise Level.
function | type | destination | amount |
---|---|---|---|
timbre | matrix | VCF Resonance | 14 |
matrix | LFO 2 Rate | 44 | |
timbre | indirect | VCF Cut-off Frequency | 3 |
matrix | LFO 1 Rate | 58 | |
pitch | fader-indirect | OSC 2 Pitch | 9 |
timbre | matrix | VCF Cut-off Frequency | -9 |
fx | matrix | UNKNOWN DESTINATION | 48 |
timbre | matrix | Noise Level | -38 |
Controls VCF Keyboard Tracking.
function | type | destination | amount |
---|---|---|---|
timbre | fader | VCF Keyboard Tracking | 255 |
Controls VCF Envelope Velocity Sensitivity.
function | type | destination | amount |
---|---|---|---|
menu | VCF Envelope Velocity Sensitivity | 128 |
Controls OSC 2 Pitch.
function | type | destination | amount |
---|---|---|---|
pitch | fader | OSC 2 Pitch | 9 |
name | value |
---|---|
LFO 1 Rate | 0.17Hz (49) |
LFO 1 Delay / Fade | 0s (0) |
LFO 1 Shape | Sine |
LFO 1 Key Sync | off |
LFO 1 Arp Sync | off |
LFO 1 Mono Mode | 1 |
LFO 1 Slew Rate | 144 |
Controls VCF Cut-off Frequency.
function | type | destination | amount |
---|---|---|---|
timbre | matrix | VCF Cut-off Frequency | 3 |
name | value |
---|---|
LFO 2 Rate | 0.51Hz (87) |
LFO 2 Delay / Fade | 0s (0) |
LFO 2 Shape | Sine |
LFO 2 Key Sync | off |
LFO 2 Arp Sync | off |
LFO 2 Mono Mode | 1 |
LFO 2 Slew Rate | 125 |
Controls VCA Gain for All Voices.
function | type | destination | amount |
---|---|---|---|
volume | menu | VCA Gain for All Voices | 255 |
name | value |
---|---|
VCA Envelope Attack Time | 0s (0) |
VCA Envelope Decay Time | 0s (0) |
VCA Envelope Sustain Level | 100% (255) |
VCA Envelope Release Time | 0s (0) |
VCA Envelope Trigger Mode | Key (0) |
VCA Envelope Attack Curve | 128 |
VCA Envelope Decay Curve | 0 |
VCA Envelope Sustain Curve | 128 |
VCA Envelope Attack Curve | 0 |